Excavate foundation pit in softloose soil, not exceeding 1.5 m deep, 10 m2 on plan,Provide and lay

Key dates

1. Published

   30 Oct 2026, 05:59 PM IST

2. Bid submission starts

   30 Oct 2026, 05:59 PM IST

3. Bid submission ends

   10 Nov 2026, 04:00 PM IST

4. Bids open

   11 Nov 2026, 04:00 PM IST

Eligibility and documents required

Work description

3584 × necessary staging. , Provide, erect, maintain and remove formwork to rectangular RCC columns, including staging, bracing and all supports, for rough concrete surfaces receiving granite finishes. , Provide, erect, maintain and remove formwork to beam sides and soffit, including adequately designed staging, bracing and all supports, for rough concrete surfaces receiving granite finishes. , Supply cut bend and fix Fe500D TMT bars 10 mm and above in pile caps columns and beams including binding and fixing. Pile main bars excluded and measured separately. , Supply, cut, bend and fix 8 mm TMT bars as column beam links, stirrups and cross ties , Build 230 mm thick curved brick crest above RCC beam using subclass B burnt clay bricks in cement mortar 1 4 including cutting bonding scaffolding and curing as per approved profile. , Supply and fix 20 mm polished granite on column faces in cement mortar 1 4 including cutting edge finishing and pointing Concealed faces and mechanical restraints excluded , Supply and fix 20 mm polished granite on beam sides soffit and top in cement mortar 1 4 including cutting edge finishing and pointing Masonry bearing and soffit restraints excluded , Supply and fix 12 mm polished granite veneer on both faces of brick crest in cement mortar 1 3 including profile cutting and pointing subject to schedule approval , Supply and fix 20 mm polished granite strips on curved brick crest including profile cutting edge finishing bedding and pointing with curved fabrication allowance. , Provide stainless steel anchors for elevated granite cladding and soffit including drilling approved fixings and installation as per approved design and actual details. , Carry out surface excavation in soft loose soil, average 240 mm deep and not exceeding 300 mm , Remove surplus soil from paving formation to an approved location within 50 m , Provide and lay 150 mm thick PCC 1 2 4 with 40 mm aggregate including base preparation compaction finishing curing and panel construction to approved levels and falls Cobble finish separate. , Supply and lay 60 mm sandstone cobbles over 30 mm mortar bedding 1 4 on PCC including cutting joint filling compaction curing and finishing to approved pattern and falls. , Supply and install carved sandstone cupola 4 ft high and 3.5 ft square , Supply and fix 12 W IP65 outdoor LED lights with driver brackets and connectors including connection and testing subject to approved model Point wiring separate. , Provide primary wiring for two light groups using 1.5 mm2 FRLS copper wires in PVC , Provide wiring for 18 additional light points using 1.5 mm2 FRLS copper wires in PVC conduit on existing switch circuit as per SSR scope. , Supply and fix 914.4 mm brass sun motif on crest including fabrication polishing , Provisional sum for brass lettering per pillar including fixing and protective coating Final text language size quantity thickness and design subject to approval , Provisional sum for 20 m electrical feeder weatherproof panel with MCB RCCB timer two GI plate earthing sets pits leads and accessories as per approved design Excludes utility charges , Provide 12 mm cement plaster in mortar 1 4 to columns beams and brick crest including surface preparation keying levelling and curing for granite fixing. Granite bedding separate. , Provide 12 mm cement plaster in mortar 1 4 to beam soffit including preparation staging levelling and curing as granite substrate with ceiling extra Granite anchors to engage structural

Tender documents

• GEM-2026-B-8222548.pdfGeM bid document

Download documents here with a free account, or from the portal itself. Create free account